Hayabusa2 left Earth in 2014 and is scheduled to arrive at Ryugu — which is about 180 million miles (290 million km) from Earth at the moment — Wednesday (June 27) or thereabouts.
Eventually, the mothership will deploy a total of three rovers and a lander onto Ryugu's surface continue reading: https://www.space.com/40987-japan-hayabusa2-asteroid-probe-closes-on-ryugu.html
Hayabusa 2/MASCOT mission: https://www.dlr.de/dlr/en/desktopdefault.aspx/tabid-10976/1756_read-23829/#/gallery/11288
From DLR:
Timeline
| Launch of Hayabusa2 spacecraft |
3 December 2014 |
| Health check of the MASCOT lander |
June 2015 |
| Calibration of MASCOT instruments |
September 2015 |
| Earth fly-by |
December 2015 |
| Health check of the MASCOT lander |
July 2016 |
| Calibration of MASCOT instruments |
November 2016 |
| Health check of the MASCOT lander |
May 2017 |
| Calibration of MASCOT instruments |
November 2017 |
| Health check of the MASCOT lander |
Spring 2018 |
| Hayabusa2 arrives at asteroid |
June/July 2018 18-month long stay |
| MASCOT lands on asteroid Ryugu |
Between 1 and 4 October 2018 |
| Hayabusa2 collects samples of the asteroid during a short ground contact (possibly several times) |
2019 |
| Hayabusa2 to depart from asteroid |
November/December 2019 |
| Hayabusa2 to arrive at Earth |
Late 2020 |
Hayabusa2 spacecraft, Specifications/Instruments
| Type of mission |
Asteroid sample return mission |
| Operator |
JAXA |
| Launch date |
3 December 2014, 04:22 UTC |
| Launch site |
Yoshinobu Launch Complex, Tanegashima Space Center |
| Rocket |
H-IIA 202 (Flugnummer F26) |
| Mission length |
6 years, return planned for December 2020 |
| Mission control centre |
JAXA SSOC (Sagamihara Space Operations Center) |
| MASCOT control centre |
DLR Microgravity User Support Center (MUSC)
|
| Launch mass |
approx. 600 kilograms |
| Key features |
| Electric Propulsion System (Ion engine) |
Used for changing orbit during journey to asteroid as well as
return to Earth; engine is energy-efficient, with one tenth of power
consumption compared to chemical propellant |
| Sampler mechanism |
SMP to collect samples from surface of asteroid. Cylinder-shaped
sampler horn will be lowered to surface, shooting out a small projectile
once it makes contact with the surface. Materials ejected will then be
collected via a catcher
|
| Target markers |
Five beanbag-type markers will descend to the asteroid's surface
to serve as artificial landmarks prior to landing for the distance
measurement of teh collision warning syst. The target markers are hollow
and filled with a granulate that dampens the kinetic energy and thus
prevents them from bouncing from the surface. |
| Re-entry capsule |
Container that stores samples from asteroid and will re-enter Earth’s atmosphere at 12 kilometres per second. |
| Mission instruments |
| Small Carry-on Impactor (SCI) |
Two-kilogram copper lump to collide with surface of asteroid to
make an artificial crater, used to study the inside structure of the
asteroid before and after impact; will also be used to sample 'fresh'
material underground |
| Near InfraRed Spectrometer (NIRS3) and Thermal Infrared Imager (TIR) |
Remote sensing instruments to measure asteroid from Hayabusa2’s 20
kilometre-distance position. NIRS3 will investigate mineral and water
metamorphism; TIR to study temperature and thermal inertia of asteroid
|
| MINERVA-II |
3 small rovers that will study the asteroid from its surface.
|
| MASCOT |
Small lander that will study the asteroid using four observation devices and that will hop to three locations on the asteroid
|
MASCOT lander specifications/Instruments
| Dimensions |
295 mm x 275 mm x 195 mm |
| Weight |
9.6 kilograms |
| Target asteroid |
162173 Ryugu |
| Mother craft |
Hayabusa2 |
| Operators |
DLR, CNES, JAXA |
| Instruments |
| MASCOT Camera (MASCAM) |
Wide-angle camera that takes pictures during the descent to the
asteroid surface and will provide ground data for the instruments on
board Hayabusa2 as well as contextual information for the instruments on
board MASCOT. (Institute of Planetary Research, DLR) |
| MASCOT Radiometer (MARA) |
The radiometer is used for the high-resolution determination of
the surface temperature as well as the thermal changes during the
day-night changes on the asteroid. (Institute of Planetary Research,
DLR) |
| Magnetometer (MAG) |
Determination of the asteroid's magnetic field (Institute of Geophysics and Extraterrestrial Physics, TU Braunschweig) |
| Infrared spectrometer (MicrOmega) |
Determination of the mineralogical composition of the asteroid
surface. (Institut d'Astrophysique Spatiale, Université Paris Sud) |
The target: Asteroid (162173) Ryugu (formerly 1999 JU3)
| Origin |
C-class asteroid (carbon-rich), near-Earth asteroid of the Apollo group |
| Discovery |
May 1999 |
| Discoverer |
LINEAR (Lincoln Near Earth Asteroid Research) Team |
| Shape |
Approximately spherical with the irregularities expected in small bodies (determined by thermal observations. |
| Diameter |
880 ± 15 metres |
| Rotation period |
7.6 hours |
| Albedo |
0.05 (very low, darker than coal) |
Read more...
Entradas
