miércoles, 23 de mayo de 2012

EADS North America UH-72A Lakota fleet hits 100,000 flight hour milestone

HERNDON, Va. and HUNTSVILLE, Ala., May 22, 2012
Lakota fleet achieves 100,000 flight hours with 219 aircraft operating in U.S., Europe, Caribbean, and Pacific with Army and Army National Guard units

The U.S. Army's fleet of 219 UH-72A Lakota helicopters surpassed the 100,000 flight hour milestone during operations on May 10. The 100,000 flight hour aircraft, configured for Opposing Force training missions, was flown by Chief Warrant Officer 3 Jason Lacrosse and Chief Warrant Officer 4 Christopher Ezell of the Joint Multinational Readiness Center's Falcon Observer/Controller-Trainer Team in Hohenfels, Germany, during a multinational training exercise.

The Army's fleet of Lakota helicopters, built by the company's American Eurocopter business unit in Columbus, Miss., have been in operation since November 2006 with all 219 helicopters to date delivered on schedule and within budget. The Army's requirement is 345 Lakotas through 2016. An additional five aircraft have been delivered to the U.S. Navy for test pilot training.

"Achieving 100,000 flight hours in just five-and-a-half years and remaining on schedule and on cost is an extraordinary accomplishment for a major defense acquisition program," said Col. Thomas Todd, the Army's Utility Helicopter Project Manager.

"Over the past seven years, the Lakota program has been a model of program execution, and this latest flight milestone reinforces the reliability and solid performance of the UH-72A," said Sean O'Keefe, EADS North America Chairman and CEO. "Our entire industry team takes great pride in delivering a fleet of aircraft with an extremely high operational availability rate, mission flexibility and extraordinary reliability. The program's success is built on a very strong partnership with the Army program office."

The 100,000 flight hour milestone reflects the structure and execution of the Lakota program's logistics concept. A combination of full contractor logistics support (CLS) and hybrid CLS enables the Army and Army National Guard to operate the aircraft in accordance with their flying hour plan. The Army program office, military units, and the industry team of EADS North America, American Eurocopter and Helicopter Support International has provided tailored program logistics to the Army and Army National Guard since 2006.

The Lakota fleet has averaged an operational availability rate greater than 90 percent for locations with the full contractor logistics (CLS) support, encompassing 18 different military units. The hybrid CLS is equally successful with a parts support fill rate exceeding 95 percent. These metrics are 10 percent higher than the program's contractual requirements.

The latest evolution of the Lakota is delivered in the Security and Support (S&S) Battalion Mission Equipment Package configuration for the Army National Guard, which is currently using numerous S&S Lakotas along the U.S. Southwest border, flying 1,500 hours in the first three months of operation.

The S&S MEP contains a centerline electro-optical infrared (EO/IR) sensor, a 30 million candlepower search light, analog/digital video downlink, rear observer's console with a 15-inch display, an enhanced tactical communications suite, an onboard digital video recorder, 10.4-inch auxiliary displays for the pilot and copilot, and a video management system.

The UH-72A is a Defense Acquisition Category (ACAT) 1C major defense acquisition program for the U.S. Defense Department, and it marked one of the most rapid introductions of a new aircraft in the U.S. Army's history. Deliveries of the UH-72A to National Guard and Active Component units allow aging OH-58 and UH-1 rotary-wing aircraft to be retired and allow UH-60 Black Hawks to be returned to combat operations.

About American Eurocopter (www.eurocopterusa.com)
American Eurocopter is a helicopter manufacturer that produces, markets, sells and supports the broadest range of civil and para-public helicopters offered by any manufacturer in the United States. The company is a subsidiary of EADS North America Holdings, the North American operations of EADS, a global leader in aerospace, defense and related services, and is an affiliate of Eurocopter, the largest helicopter manufacturer in the world. American Eurocopter's product line represents the most cost-effective, technologically-advanced helicopters, ranging from light single to heavy twin, serving all markets and missions. Company headquarters and main facilities are located in Grand Prairie, Texas, with a large manufacturing and production facility in Columbus, Miss., that produces the UH-72A for the U.S. Army's Light Utility Helicopter program.

About EADS North America (www.eadsnorthamerica.com)
EADS North America is the North American operation of EADS, a global leader in aerospace, defense and related services. As a leader in all sectors of defense and homeland security, EADS North America and its parent company, EADS, contribute over billion to the U.S. economy annually and support more than 200,000 American jobs through its network of suppliers and services. Operating in 17 states, EADS North America offers a broad array of advanced solutions to its customers in the commercial, homeland security, aerospace and defense markets.

About EADS (www.eads.com)
EADS is a global leader in aerospace, defense and related services. In 2011, the Group - comprising Airbus, Astrium, Cassidian and Eurocopter – generated revenues of € 49.1 billion and employed a workforce of over 133,000.

Eurocopter delivers the first Airbus A350 XWB jetliner passenger door, highlighting its innovative capabilities in composite technology

Donauwörth, Germany, May 23, 2012

This month's delivery of Eurocopter's initial A350 XWB jetliner passenger door produced at its Donauwörth, Germany facility represents a further milestone in a program that underscores synergies between helicopter production and the construction of carbon fiber aircraft components.

In a ceremony in Donauwörth's C4 production building, Dr. Wolfgang Schoder, Eurocopter Executive Vice President - Programs, and Dr. Michael Rehmet, Vice President - Airplane Door Systems, marked this delivery milestone with Didier Evrard, Airbus Executive Vice President and A350 Program Head.

As prime contractor and system supplier, Eurocopter is providing a full set of door systems that will equip this latest widebody member of Airbus' jetliner family.


"The development and manufacture of aircraft components is another mainstay of Eurocopter's activities in Germany, which complements our helicopter production," Schoder explained. "The A350 XWB's door systems demonstrate our innovative strength and international competitiveness in the field of carbon fiber technology."

The A350 XWB passenger doors are the first for a commercial aircraft to be made entirely of carbon fiber reinforced plastic – an ideal material for modern aircraft construction, which is characterized by its combination of lightness and rigidity, as well as its outstanding fatigue properties and corrosion resistance.

Benefits of Eurocopter's technical innovation in the A350 XWB aircraft doors include a reduction in parts, the application of advanced mechanical systems and equipment that are easier to maintain, and additional safety features. Series production is handled at the company's Donauwörth site in a new building designed to meet the exacting requirements of automated production methods and quality control at high production rates.

"Assembly of the A350 XWB is progressing well and all the teams and suppliers, like Eurocopter, are strongly focused on working together to deliver a best-in-class aircraft at entry into service," said Didier Evrard, Executive Vice President – Head of A350 XWB Programme, Airbus. "The A350 XWB brings together the latest in aerodynamics, design and advanced technologies from Airbus and our partners to provide a 25 percent step-change in fuel efficiency compared to the competition."

Eurocopter currently has approximately 250 employees working on the A350 XWB passenger door program's design, development and production. Series production eventually will involve more than 400 employees. Total value of the A350 XWB door systems to be provided by Eurocopter is nearly 1.5 billion euros, which includes the cargo doors subcontracted to program partners in South Korea.

In addition to the passenger door presented to Airbus today, five cargo doors already have been delivered. A total of seven door shipsets for the A350 XWB are slated for delivery in 2012 – each composed of four pairs of passenger doors, two cargo doors and one baggage door.

Eurocopter employs a total of some 1,300 personnel in Germany on the development, production, and maintenance of aircraft components. Every year, the Donauwörth site produces more than 4,000 passenger and cargo doors for various aircraft types in the Airbus product line.

Airbus Military mantiene final de año como entrega del primer A400M al Ejército francés

Así lo ha confirmado durante un encuentro con diferentes medios de comunicación en  Toulouse, Cedric Gautier, jefe del programa A400M, quien ha recordado el calendario previsto de entregas del nuevo avión de transporte de Airbus Military
 
 

Singular evento internacional de Airbus en Toulouse, Francia, para reclutar nuevos empleados

Abierto el plazo de solicitud para los nuevos puestos de trabajo en todos los programas de aviones de Airbus, desde hoy y hasta el 28 de mayo

22 May 2012

Airbus, el fabricante líder de aviones, lanza el sábado 30 de junio, 2012 en Toulouse, Francia, una nueva iniciativa para reclutar personal con el fin de encontrar los mejores ingenieros, técnicos y gestores para sus programas de aviones.
 
Las vacantes están disponibles en Francia, Alemania, España y Reino Unido para profesionales con talento y experiencia en las siguientes áreas: diseño de  estructura, análisis de estrés, arquitectura e integración, instalación de sistemas eléctricos, calidad, cadena de suministro, ingeniería de fabricación, servicios al cliente, así como gestión de sistemas, ensayos en vuelo y gestión de configuración.

Los candidatos deben tener como mínimo de 3 a 5 años de experiencia profesional, además de buen nivel de inglés. Para algunos puestos, se valorarán conocimientos de francés, alemán o español.

Los candidatos deberán enviar su solicitud a través de nuestra página web www.airbus.com/work antes del 28 de mayo de 2012. Los solicitantes seleccionados recibirán información sobre dónde y a qué hora deberán acudir el día del evento.
 
"Más allá de la posibilidad de trabajar en tecnología de vanguardia, Airbus ofrece la oportunidad de trabajar en un entorno apasionante y multicultural, y una gran ocasión para desarrollar una carrera internacional", dijo Thierry Baril, vicepresidente ejecutivo de Recursos Humanos. Esperamos conocer ese día tantos candidatos como sea posible y mostrar que Airbus es un excelente lugar para trabajar".

Unique Airbus international recruitment event in Toulouse- France

Applications for jobs on all Airbus aircraft programs open from now until 28th May

22 May 2012 Press Release

Airbus, the world's leading aircraft manufacturer, is launching a new recruitment initiative in Toulouse, France, on Saturday 30th June 2012 to look for top caliber Engineers, Technicians and Managers to support all Airbus aircraft programs.

Positions are available in France, Germany, Spain and the UK for talented professionals with experience in the following areas: structure design, stress analysis, architecture & integration, electrical systems installation, quality, supply chain, manufacturing engineering, customer services as well as systems, flight test and configuration management.

Candidates should have at least 3-5 years of professional experience, as well as a good level of English. For certain positions some knowledge of French, German or Spanish would be a plus.

Candidates should apply on our webpage www.airbus.com/work by 28th May 2012. If selected to participate, applicants will receive information on venue, timings and other arrangements to attend the recruitment day.

"Beyond the opportunity to work on cutting edge products, Airbus gives a chance to work in a stimulating and multicultural environment, with great development opportunities and potential for an international career path," said Thierry Baril, Executive Vice President Human Resources. We are looking forward to meeting as many candidates as possible on the day and showing that Airbus is a great place to work."

La nueva planta de Carbures en Jerez estara lista en un mes

La compañía Carbures Europe S.A., dedicada al diseño y fabricación de productos para la industria aeronáutica, va a finalizar la construcción de su nueva planta en Jérez -segunda sede en Europa- en el plazo de un mes. La planta comezará a funcionar en el mes de septiembre con medio centenar de trabajadores.
http://www.iies.es/La-nueva-planta-de-Carbures-en-Jerez-estara-lista-en-un-mes_a2237.html

Logran generar hidrogeno de forma autonoma empleando luz solar

 

Inspirándose en la fotosíntesis natural, expertos de la Universidad Jaume I de Castellón han conseguido generar hidrógeno empleando la luz solar. El experimento esta basado en los procesos de la naturaleza y supone un reto crucial para hacer realidad un cambio de modelo energético que sea respetuoso con el medio ambiente.

SuperJet International: SSJ100 crash ‘does not alter our belief in the aircr...

 
 

Sent to you by SandGlass via Google Reader:

 
 


Subdued representatives from SuperJet International (SJI) told reporters at the Regional Airline Assn. (RAA) annual convention in Minneapolis Tuesday that the recent crash of a Sukhoi Superjet SSJ100 has not significantly altered plans to manufacture and market the Russian-built regional aircraft.


 
 
 
 

F-15s scrambled to escort diverted flight

 
 

Sent to you by SandGlass via Google Reader:

 
 


BANGOR, Maine — A US Airways jet traveling from Paris to North Carolina was diverted to Maine on Tuesday after a French passenger handed a note to a flight attendant mentioning that she had a surgically implanted device, raising fears of a terror scenario that security officials had warned about.

 
 
 
 

AeroVironment Introduces Digital Wasp AE Small Unmanned Aircraft System ... ...

 
 

Sent to you by SandGlass via Google Reader:

 
 



Defense Update

AeroVironment Introduces Digital Wasp AE Small Unmanned Aircraft System ...
MarketWatch (press release)
At SOFIC--AeroVironment (NASDAQ:AVAV) today introduced the Wasp AE(TM) small unmanned aircraft system and announced that it has been accepted by the US Air Force for inclusion in its Battlefield Air Targeting Micro Air Vehicle (BATMAV) program.
Wasp AE (Photo: Business Wire)TheStreet.com (press release)

los 7 artículos informativos »

 
 

Things you can do from here:

 
 

KC-30 mods underway - Australian Aviation

 
 

Sent to you by SandGlass via Google Reader:

 
 



Australian Aviation

KC-30 mods underway
Australian Aviation
Airbus Military says it is working to implement key modifications that reduce aircrew workload and improve awareness when operating the boom refueling system for the RAAF's KC-30/A330 MRTT tankers by the end of the year. The modifications, agreed to ...
Schedule concerns drive UK's next Voyager conversion to SpainFlightglobal

los 4 artículos informativos »

 
 

Things you can do from here: